Thinker Talk

How to print and assembly the Arduino based Bluetooth (BLE) Android controlled RC car BlueCArd. In this tutorial, I'll show You how to print and assemble the fully 3D printed Arduino based and through Bluetooth Low Energy (BLE) with Android device, controlled RC car BlueCArd. At the end of this tutorial, You should be able to build your own BlueCArd. 3D printing the parts I designed all parts to be as easy as possible to print. I used these settings for all parts: 20% infill

How to connect a servo motor to an Arduino Nano microcontroller and how to control it from an Android device using Bluetooth Low Energy (BLE). This tutorial is part of the BlueCArd tutorials series with the ultimate to build the BlueCArd Arduino based RC car controlled from Android phone through Bluetooth. In this tutorial, I'll explain what is a servo motor and how to connect it to an Arduino microcontroller. I will also show you how to control it remotely from an Android de

How to connect and control a DC Motor to an Arduino Nano using an H-Bridge and how to send commands from Android to the Arduino Nano microcontroller to control the DC Motor. This tutorial is part of the BlueCArd tutorials series with the ultimate to build the BlueCArd Arduino based RC car controlled from Android phone through Bluetooth. In this tutorial, I'll explain how an H-Bridge works and how to use it to control a DC motor. Then I'll show You how to extend the Android Ap