Thinker Talk

How to print and assembly the Arduino based Bluetooth (BLE) Android controlled RC car BlueCArd. In this tutorial, I'll show You how to print and assemble the fully 3D printed Arduino based and through Bluetooth Low Energy (BLE) with Android device, controlled RC car BlueCArd. At the end of this tutorial, You should be able to build your own BlueCArd. 3D printing the parts I designed all parts to be as easy as possible to print. I used these settings for all parts: 20% infill

How to connect a servo motor to an Arduino Nano microcontroller and how to control it from an Android device using Bluetooth Low Energy (BLE). This tutorial is part of the BlueCArd tutorials series with the ultimate to build the BlueCArd Arduino based RC car controlled from Android phone through Bluetooth. In this tutorial, I'll explain what is a servo motor and how to connect it to an Arduino microcontroller. I will also show you how to control it remotely from an Android de

How to connect and control a DC Motor to an Arduino Nano using an H-Bridge and how to send commands from Android to the Arduino Nano microcontroller to control the DC Motor. This tutorial is part of the BlueCArd tutorials series with the ultimate to build the BlueCArd Arduino based RC car controlled from Android phone through Bluetooth. In this tutorial, I'll explain how an H-Bridge works and how to use it to control a DC motor. Then I'll show You how to extend the Android Ap

How to connect to and control an Arduino Nano with an AT-09 / HM-10 Bluetooth Low Energy (BLE) module from an Android device. This tutorial is part of the BlueCArd tutorials series with the ultimate to build the BlueCArd Arduino based RC car controlled from Android phone through Bluetooth. In the last tutorial I showed you how to connect the Bluetooth module to the Arduino microcontroller and how to send data between the Arduino Nano and the BLE module. In this tutorial we wi

How to connect and configure a Bluetooth module to communicate with Arduino

To power the Arduino Board and the rest of the electronic we need a stable power source. In this tutorial I'll show you what is a DC DC Boost Converter (aka step up converter), how to use it and why we need it The elements used in this tutorial are from the list of elements needed for BlueCArd. The detailed list can be found here: BlueCArd - list of elements The elements needed for this tutorial are: The elements from the last tutorial (without the USB cable): Arduino Nano Fi

You want to build BlueCArd? Here is a detailed list of all the parts needed!